QF-HX103C IPTV 1GE+3FE CATV XPON ONT

1G3F+CATV ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions by Qualfiber, and The carrier-class FTTH application provides data service access. 1G3F+CATV ONU is based on mature and stable, cost-effective XPON technology. It can switch automatically between EPON and GPON when it accesses the EPON OLT or GPON OLT. 1G3F+CATV ONU adopts high reliability, easy management, configuration flexibility, and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X. 1G3F+CATV ONU is designed by Realtek chipset 9603C. 2.Functional Feature Support GPON and EPON Mode, and switch mode automatically Support ONU auto-discovery/Link detection/remote upgrade of software WAN connections support Route and Bridge mode Route mode supports PPPoE/DHCP/ static IP Support QoS and DBA Support port Isolation and port VLAN configuration Support Firewall function and IGMP snooping multicast feature Support LAN IP and DHCP Server configuration; Support CATV interface for IPTV, remotely controlled by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT. Support Port Forwarding and Loop-Detect Support TR069 remote configuration and maintenance Specialized design for system breakdown prevention to maintain stable system 3.Hardware Specification

Technical item	Details
PON Interface	2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
	Receiving sensitivity: ≤-28dBm
	Transmitting optical power: 0~+4dBm
	Transmission distance: 20KM
Wavelength	TX: 1310nm, RX: 1490nm
Optical Interface	SC/UPC Connector or customized
LAN Interface	1 x 10/100/1000Mbps and 3 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
CATV Interface	RF, optical power : +2~-18dBmOptical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz,  RF output impedance: 75ΩRF output level: 78dBuVAGC range: 0~-15dBmMER: ≥32dB@-15dBm
LED	Status of POWER, LOS, PON, SYS, LAN1~LAN4 , Internet,  Worn, Normal(CATV)
Push-Button	1,For Function of Reset
Operating Condition	Temperature: 0℃~+50℃
	Humidity: 10%～90%（non-condensing）
Storing Condition	Temperature: -30℃~+60℃
	Humidity: 10%~90%（non-condensing）
Power Supply	DC 12V/1A
Power Consumption	≤6W
Dimension	155mm×92mm×34mm（L×W×H）
Net Weight	0.24Kg

4.Panel lights Introduction

Pilot Lamp	Status	Description
PWR	On	The device is powered up.
	Off	The device is powered down.
PON	On	The device has registered to the PON system.
	Blink	The device is registering the PON system.
	Off	The device registration is incorrect.
LOS	Blink	The device doses not receive optical signals.
	Off	The device has received optical signal.
SYS	On	The device system runs normally.
	Off	The device system runs abnormally.
INTERNET	Blink	The device network connection is normal.
	Off	The device network connection is abnormal.
LAN1~LAN4	On	Port (LANx) is connected properly (LINK).
	Blink	Port (LANx) is sending or/and receiving data (ACT).
	Off	Port (LANx) connection exception or not connected.
Worn (CATV)	On	Input optical power is higher than 3dbm or lower than -13dbm
	Off	Input optical power is between -13dbm and 3dbm
Normal (CATV)	On	Input optical power is between -13dbm and 3dbm
	Off	Input optical power is higher than 3dbm or lower than -13dbm

5.Application Typical Solution：FTTO(Office)、 FTTB(Building)、FTTH(Home) Typical Application(optional)：INTERNET、IPTV、VOD、VoIP、IP Camera etc. Figure: All function Optional Application Diagram 6.Ordering information

Product Name	Product Model	Descriptions
XPON ONU 1G3F +CATV	QF-HX103C	1x10/100/1000Mbps Ethernet, 3 x 10/100Mbps Ethernet, 1 SC/APC Connector, 1x CATV port, Plastic Casing, External power supply adapter

Contact us: Qualfiber Technology Co., Ltd                                                Email to us: sales@qualfiber.com Website: https://www.qualfiber.com Specifications are subject to change without notice. Copyright © QUALFIBER TECHNOLOGY. All rights reserved.