QF-HX101WC 1GE+1FE WIFI+CATV XPON ONU (Both GPON and EPON)

1. Overview

  •  1G1F+WIFI+CATV series is designed as HGU(Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
  •  1G1F+WIFI+CATV series is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON when it access to the EPON OLT or GPON OLT.
  •  1G1F+WIFI+CATV series adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
  •  1G1F+WIFI+CATV series is designed by Realtek chipset.

2. Functional Feature

  •  Support EPON and GPON Mode, and switch mode automatically
  •  Support ONU auto-discovery/Link detection/remote upgrade of software
  •  WAN connections support Route and Bridge mode
  •  Route mode supports PPPoE/DHCP/ static IP
  •  Support WIFI Interface and multiple SSID
  •  Support QoS and DBA
  •  Support port Isolation and port VLAN configuration
  •  Support Firewall function and IGMP snooping multicast feature
  •  Support  LAN IP and DHCP Server configuration;
  •  Support Port Forwarding and Loop-Detect
  •  Support TR069 remote configuration and maintenance
  •  Support CATV interface for IPTV, remotely control by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT.
  •  Specialized design for system breakdown prevention to  maintain stable system

3. Hardware Specification

Technical item Details
PON Interface 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
Receiving sensitivity: ≤-27dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
Wavelength TX: 1310nm, RX: 1490nm
Optical Interface SC/APC Connector
LAN Interface 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
CATV interface RF, optical power : +2~-18dBm
Optical reflection loss: ≥45dB
Optical receiving wavelength: 1550±10nm
RF frequency range: 47~1000MHz,  RF output impedance: 75Ω
RF output level: 78dBuV
AGC range: 0~-15dBm
MER: ≥32dB@-15dBm
Wireless Compliant with IEEE802.11b/g/n,
Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: multiple SSID Channel: Auto Modulation type: DSSS, CCK and OFDM Encoding scheme: BPSK, QPSK, 16QAM and 64QAMLEDStatus of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、Internet、Worn(CATV)、Normal(CATV)Push-Button3,For Function of Reset、WLAN、WPSOperating ConditionTemperature: 0℃~+50Humidity: 10%~90%(non-condensing)Storing ConditionTemperature: -30℃~+60℃Humidity: 10%~90%(non-condensing)Power SupplyDC 12V/1APower Consumption≤6WDimension155mm×92mm×34mm(L×W×H)Net Weight0.24Kg

4. Panel lights Introduction

Pilot Lamp

Status

Description

PWR

On

The device is powered up.

Off

The device is powered down.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LOS

Blink

The device doses not receive optical signals.

Off

The device has received optical signal.

SYS

On

The device system runs normally.

Off

The device system runs abnormally.

INTERNET

Blink

The device network connection is normal.

Off

The device network connection is abnormal.

WIFI

On

The WIFI interface is up.

Blink

The WIFI interface is sending or/and receiving data (ACT).

Off

The WIFI interface is down.

WPS

Blink

The WIFI interface is securely establishing a connection.

Off

The WIFI interface does not establish a secure connection.

LAN1

On

Port(LAN1) is connected properly (LINK).

Blink

Port(LAN1) is sending or/and receiving data (ACT).

Off

Port(LAN1) connection exception or not connected.

LAN2

On

Port(LAN2) is connected properly (LINK).

Blink

Port(LAN2) is sending or/and receiving data (ACT).

Off

Port(LAN2) connection exception or not connected.

Worn

(CATV)

On

Input optical power is higher than 3dbm or lower than -13dbm

Off

Input optical power is between -13dbm and 3dbm

Normal

(CATV)

On

Input optical power is between -13dbm and 3dbm

Off

Input optical power is higher than 3dbm or lower than -13dbm

5.  Application

l Typical SolutionFTTO(Office)FTTB(Building)FTTH(Home)

l Typical Application(optional)INTERNETIPTVVODVoIPIP Camera etc.

 

Figure: All function Optional Application Diagram

 

 

6. Ordering information

Product Name

Product Model

Descriptions

XPON ONU 1G1F+WIFI+CATV

QF-HX101WC

1x10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC/APC Connector,1x CATV RF single fiber port, 2.4GHz WIFI , Plastic Casing, External power supply adapter

Contact us:

Qualfiber Technology Co., Ltd                                                

Email to us: sales@qualfiber.com

Website: http://www.qualfiber.com

Specifications are subject to change without notice.

Copyright © QUALFIBER TECHNOLOGY. All rights reserved.


  • QF-HX101WC 1GE+1FE WIFI+CATV XPON ONU (Both GPON and EPON) Related Video: