| Technical item | Details |
| PON Interface | 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++) |
| Receiving sensitivity: ≤-27dBm | |
| Transmitting optical power: 0~+4dBm | |
| Transmission distance: 20KM | |
| Wavelength | TX: 1310nm, RX: 1490nm |
| Optical Interface | SC/APC Connector |
| LAN Interface | 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto-adaptive Ethernet interfaces. Full/Half, RJ45 connector |
| Wireless | Compliant with IEEE802.11b/g/n, Operating frequency: 2.400-2.4835GHz support MIMO, rate up to 300Mbps, 2T2R,2 external antenna 5dBi, Support: multiple SSID Channel: Auto Modulation type: DSSS, CCK, and OFDM Encoding scheme: BPSK, QPSK, 16QAM, and 64QAM |
| LED | Status of POWER、LOS、PON、SYS、LAN1、LAN2、WIFI、WPS、Internet |
| Push-Button | 3, For Function of Reset、WLAN、WPS |
| Operating Condition | Temperature: 0℃~+50℃ |
| Humidity: 10%～90%（non-condensing） | |
| Storing Condition | Temperature: -30℃~+60℃ |
| Humidity: 10%~90%（non-condensing） | |
| Power Supply | DC 12V/1A |
| Power Consumption | ≤6W |
| Dimension | 155mm×92mm×34mm（L×W×H） |
| Net Weight | 0.24Kg |
| Pilot Lamp | Status | Description |
| PWR | On | The device is powered up. |
| Off | The device is powered down. | |
| PON | On | The device has registered to the PON system. |
| Blink | The device is registering the PON system. | |
| Off | The device registration is incorrect. | |
| LOS | Blink | The device does not receive optical signals. |
| Off | The device has received an optical signal. | |
| SYS | On | The device system runs normally. |
| Off | The device system runs abnormally. | |
| INTERNET | Blink | The device network connection is normal. |
| Off | The device network connection is abnormal. | |
| WIFI | On | The WIFI interface is up. |
| Blink | The WIFI interface is sending or/and receiving data (ACT). | |
| Off | The WIFI interface is down. | |
| WPS | Blink | The WIFI interface is securely establishing a connection. |
| Off | The WIFI interface does not establish a secure connection. | |
| LAN1 | On | Port(LAN1) is connected properly (LINK). |
| Blink | Port(LAN1) is sending or/and receiving data (ACT). | |
| Off | Port(LAN1) connection exception or not connected. | |
| LAN2 | On | Port(LAN2) is connected properly (LINK). |
| Blink | Port(LAN2) is sending or/and receiving data (ACT). | |
| Off | Port(LAN2) connection exception or not connected. |
| Product Name | Product Model | Descriptions |
| XPON ONU 1G1F+WIFI | QF-HX101W | 1x10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet, 1 SC/APC Connector, 2.4GHz WIFI, Plastic Casing, External power supply adapter |