1. Overview
  • 1G1F+CATV ONU is designed as HGU (Home Gateway Unit) in deferent FTTH solutions by Qualfiber, The carrier-class FTTH application provides data service access.
  • 1G1F+CATV ONU is based on mature and stable, cost-effective GPON and EPON technology. It can access to the major GPON and EPON OLT.
  • 1G1F+CATV ONU adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of telecom EPON CTC3,0 and GPON Standard of ITU-TG.984.X
    • 1G1F+CATV ONU is designed by Realtek chipset 9603C.
2. Functional Feature
  • Support GPON and EPON Mode and switch mode automatically
  • Support ONU auto-discovery/Link detection/remote upgrade of software
  • WAN connections support Route and Bridge mode
  • Route mode supports PPPoE/DHCP/ static IP
  • Support QoS and DBA
  • Support port Isolation and port VLAN configuration
  • Support  Firewall function and IGMP snooping multicast feature
  • Support  LAN IP and DHCP Server configuration
  • Support CATV interface for IPTV, remotely control by Qualfiber/Huawei/ZTE/FiberHome/OEM OLT
  • Support Port Forwarding and Loop-Detect
  • Support TR069 remote configuration and maintenance
  • Specialized design for system breakdown prevention to  maintain stable system
3. Hardware Specification
Technical item Details
PON Interface 2.5G GPON Class B+/C+/C++/C+++ & 1.25G EPON PX20+/PX20++/PX20+++)
Receiving sensitivity: ≤-28dBm
Transmitting optical power: 0~+4dBm
Transmission distance: 20KM
Wavelength TX: 1310nm, RX: 1490nm
Optical Interface SC/UPC Connector
LAN Interface 1 x 10/100/1000Mbps and 1 x 10/100Mbps auto adaptive Ethernet interfaces. Full/Half, RJ45 connector
CATV Interface RF, optical power : +2~-18dBm Optical reflection loss: ≥45dB Optical receiving wavelength: 1550±10nm RF frequency range: 47~1000MHz,  RF output impedance: 75Ω RF output level: 78dBuV AGC range: 0~-15dBm MER: ≥32dB@-15dBm
LED Status of POWER、LOS、PON、SYS、LAN1、LAN2、Internet、Worn(CATV)、Normal(CATV)
Push-Button 1,For Function of Reset
Operating Condition Temperature: 0℃~+50
Humidity: 10%~90%(non-condensing
Storing Condition Temperature: -30℃~+60℃
Humidity: 10%~90%(non-condensing
Power Supply DC 12V/1A
Power Consumption ≤6W
Dimension 155mm×92mm×34mm(L×W×H
Net Weight 0.24Kg
4. Panel lights Introduction
Pilot Lamp Status Description
PWR On The device is powered up.
Off The device is powered down.
PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
LOS Blink The device doses not receive optical signals.
Off The device has received optical signal.
SYS On The device system runs normally.
Off The device system runs abnormally.
INTERNET Blink The device network connection is normal.
Off The device network connection is abnormal.
LAN1~LAN2 On Port (LANx) is connected properly (LINK).
Blink Port (LANx) is sending or/and receiving data (ACT).
Off Port (LANx) connection exception or not connected.
Worn (CATV) On Input optical power is higher than 3dbm or lower than -13dbm
Off Input optical power is between -13dbm and 3dbm
Normal (CATV) On Input optical power is between -13dbm and 3dbm
Off Input optical power is higher than 3dbm or lower than -13dbm
5.  Application
  • Typical SolutionFTTO(Office) FTTB(Building)FTTH(Home)
  • Typical Application(optional)INTERNETIPTVVODVoIPIP Camera etc.
Figure: All function Optional Application Diagram 6. Ordering information
Product Name Product Model Descriptions
XPON ONU 1G1F+CATV QF-HX101C 1x10/100/1000Mbps Ethernet, 1 x 10/100Mbps Ethernet , 1 SC Connector, 1x CATV port, Plastic Casing, External power supply adapter
Contact us: Qualfiber Technology Co., Ltd                                                Email to us: sales@qualfiber.com Website: https://www.qualfiber.com Specifications are subject to change without notice. Copyright © QUALFIBER TECHNOLOGY. All rights reserved.

  • QF-HX101C 1GE+1FE+1CATV XPON ONU(Both GPON ONT and EPON ONT) Related Video: