1Ge LAN Port xPON ONU Bridge of FTTH and UTP HGU for GPON and EPON ONT

Overview
  1. 1GE ONU is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class
  2. FTTH application provides data service access.
  3. 1GE ONU is based on mature and stable, cost-effective XPON technology. It can switch
  4. automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
  5. 1GE ONU adopts high reliability, easy management, configuration flexibility and good quality of
  6. service (QoS) guarantees to meet the technical performance of the module of China Telecom
  7. EPON CTC3.0.
  8. 1GE ONU is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
  9. 1GE ONU is designed by Realtek chipset 9601D
Feature
  1. Supports Dual Mode (can access GPON/EPON OLT).
  2. Supports SFU and HGU of EPON CTC 3.0 standard
  3. Supports GPON G.984/G.988 standards and IEEE802.3ah.
  4. Support NAT, Firewall function.
  5. Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
  6. Support port mode of vlan configuration
  7. Support LAN IP and DHCP Server configuration
  8. Support TR069 Remote Configuration and maintenance
  9. Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
  10. Support IPv4/IPv6 dual stack
  11. Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
  12. Compatible with popular OLT(Huawei, ZTE, FiberHome...)

Specification

Technical Item Details
  PON interface 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm,Downstream: 1490nmSC/UPC connectorReceiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBmTransmission distance: 20KM
LAN interface 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector
LED 4 LED, For Status of POWER、LOS、PON、LAN
Push-Button 2, for Function of Power on/off, Reset
Operating condition Temperature : 0℃~+50℃Humidity :10%~90%(non-condensing)
Storing Condition Temperature : -40℃~+60℃Humidity :10%~90%(non-condensing)
Power supply DC 12V/1A
Power Consumption <3W
Net Weight <0.2kg
Panel lights and Introduction
Pilot Status Description
POWER On The device is powered up.
Off The device is powered down.
 LOS Blink The device doses not receive optical signals.
Off The device has received optical signal.
 PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
 LAN On Port is connected properly (LINK).
Blink Port is sending or/and receiving data (ACT).
Off Port connection exception or not connected.
Application
  1.  Typical Solution:FTTO(Office) FTTB(Building)、FTTH(Home)
  2. Typical Service:Broadband Internet access
Ordering information
Product Name Product Model

Descriptions

1GE XPON PN:QF-CX010Series:CX0001R001 10/100/1000Mbps auto adaptive Ethernet(RJ45),1 SC/UPC(if APC, please note) Connector, Plastic Casing, External power supply adapter(please note standard of it)
1GE EPON PN:QF-CX010Series:CE0001R001 10/100/1000Mbps auto adaptive Ethernet(RJ45),1 SC/UPC(if APC, please note) Connector, Plastic Casing, External power supply adapter(please note standard of it)

  • 1Ge LAN Port xPON ONU Bridge of FTTH and UTP HGU for GPON and EPON ONT Related Video: