1Ge Lan CATV xPON ONU Support RF for GPON and EPON network

Overview
  1. 1GE+CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class
  2. FTTH application provides data service access.
  3. 1GE+CATV is based on mature and stable, cost-effective XPON technology. It can switch
  4. automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.
  5. 1GE+CATV adopts high reliability, easy management, configuration flexibility and good quality of
  6. service (QoS) guarantees to meet the technical performance of the module of China Telecom
  7. EPON CTC3.0.
  8. 1GE+CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.
  9. 1GE+CATV is designed by Realtek chipset 9601D
Feature
  1. Supports Dual Mode (can access GPON/EPON OLT).
  2. Supports SFU and HGU of EPON CTC 3.0 standard
  3. Supports GPON G.984/G.988 standards and IEEE802.3ah.
  4. Support CATV interface for Video Service and remote control by Major OLT
  5. Support NAT, Firewall function.
  6. Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect
  7. Support port mode of vlan configuration
  8. Support LAN IP and DHCP Server configuration
  9. Support TR069 Remote Configuration and maintenance
  10. Support Route PPPoE/DHCP/Static IP and Bridge mixed mode
  11. Support IPv4/IPv6 dual stack
  12. Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy
  13. Compatible with popular OLT(Huawei, ZTE, FiberHome...)

Specification

Technical Item Details
  Pon interface 1 GPON/EPON port(EPON PX20+ and GPON Class B+) Upstream: 1310nm, Downstream: 1490nmSC/APC connectorReceiving sensitivity: ≤-28dBm Transmitting optical power: 0~+4dBmTransmission distance: 20KM
LAN interface 10/100/1000Mbps auto adaptive Ethernet interfaces.10/100/1000M Full/Half, RJ45 connector
   CATV Interface RF, optical power : +2~-18dBm Optical reflection loss: ≥45dBOptical receiving wavelength: 1550±10nmRF frequency range: 47~1000MHz, RF output impedance: 75Ω RF output level: ≥ 82dBuV(-7dBm optical input)AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBmMER: ≥32dB(-14dBm optical input), >35(-10dBm)
LED 6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN
Push-Button 2, for Function of Power on/off, Reset
Operating condition Temperature : 0℃~50℃Humidity :10%~90%(non-condensing)
Storing Condition Temperature : -40℃~+60℃Humidity :10%~90%(non-condensing)
Power supply DC 12V/1A
Power Consumption <3W
Net Weight <0.2kg
 

Panel lights and Introduction

Pilot Status Description
POWER On The device is powered up.
Off The device is powered down.
 LOS Blink The device doses not receive optical signals.
Off The device has received optical signal.
 PON On The device has registered to the PON system.
Blink The device is registering the PON system.
Off The device registration is incorrect.
 LAN On Port is connected properly (LINK).
Blink Port is sending or/and receiving data (ACT).
Off Port connection exception or not connected.
NORMAL On Input optical power is between -18dbm and 2dBm
Off Input optical power is higher than 3dbm or lower than -18dBm
WARN On Input optical power is higher than 2dBm or lower than -18dBm
Off Input optical power is between -18dBm and 2dBm

Application

  1.  Typical Solution:FTTO(Office) FTTB(Building)、FTTH(Home)
  2.  Typical Service:Broadband Internet access, IPTV, VOD, CATV and Video Surveillance.

Ordering information

Product Name

Product Model

Descriptions

1GE+CATV XPON

PN: QF-CX010C

Series: CX0101R001

10/100/1000Mbps auto adaptive Ethernet(RJ45),1 SC/APC Connector, 1 RF Connector, Plastic Casing, External power supply adapter

1GE+CATV EPON

PN: QF-CE010C

Series: CE0101R001

10/100/1000Mbps auto adaptive Ethernet(RJ45),1 SC/APC Connector, 1 RF Connector, Plastic Casing, External power supply adapter

  • 1Ge Lan CATV xPON ONU Support RF for GPON and EPON network Related Video: